Here I put the filter Aquacomputer on a white plexiglass panel, which will be drilled to insert the connectors and switches on passers fittings PrimoChill that will go to tanks XSPC.

Tests available to the back of the desk, where they will be housed pumps, radiators and pipes soft ..... for quick assembly and maintenance.









It starts to see in the distance the arrangement of the various pieces in the back of the desk.

The tubes are starting to make their appearance .....

Here begin the tests to place the motherboard and power supply wires to understand spazie and heights .... There will be some changes with respect to what you see here during the continuation of the work

In these photographs, it is seen that the part beneath the floor of the canisters was cut to then place the sliding panel for keyboard and mouse.



The imperfections of cutting and alignment are all eliminated with epoxy glues and orbital sanders.



In this last picture you can also see the devices as CD-ROMs, lease SSD and USB 3.0 sockets




It will all then covered with a plexiglass box in white and black with a movable cover to access the inside, in order to cover this hardware because I do not like to view.

Installation of two pumps Laing DDC. Will both be controlled dall'Aquaero. Both with Heatsink, as would be in a poorly ventilated and closed, I remedied two fans of an old sink AMD Athlon socket A ...... if I'm not mistaken, a lot 'of years ago .... ... and I thought I'd mount it at where I placed my pumps. The resulting work is .... in the pictures below .....

Because I wanted to give a touch of blue in this job, go find this film on the internet for Warpping, and I used to cover the basics of tniche and realize the roadside panel to the case for the starting of the engine computers and lights ....


Before....................and.............. After................



After the warpping

I had a carbon panel that fitted to my unhealthy idea. Realize accessory dell'Aquaero. I have the Ultra Power and the controller of the LEDs ....., for which it was necessary to a panel. I do not like the original, too simple ..... so why not use that slab ....

Later I also remedied a plexiglass panel fluorescent ....., and even that has become part of the small project. The result is that the LEDs of the accessories are Aquaero to view as in the original one, and the plexiglass will be illuminated from behind with a neon Uv ....

Here I continue to try to understand format fittings, pipes peghe .... .... and accessories as you can place them both in the visible and hidden in the ...

There are some photographs ......









Maybe someone will notice that the tanks were up ....., adding 2 XSPC 150 .......... and that the tubes are no longer bent, but there are connections.

In fact the chances of finding the perfect angle and parallelism required a maniacal precision in the design and drilling millimetric Desk.
Unfortunately, there are some small imperfections that mihanno forced to fall back on fittings .... junction, also increasing the waste of money .... to have a bent tube having tuttii union fittings and pipe joints for PrimoChill .. ...

and now this photo. What I'll do with the hot glue?

This beautiful radiator has a problem. at least what I have. The housing for the fan is composed of a slot where as inserting a small nut. So, on the one hand there were these little nuts on the fly and ran to touch the other instead we were forced ....

For which in the assembly phase it would have been a dramatic thing to be able to mount nuts 12 and they were standing still. For which I use this little trick .....