UPDATE 10

Today I had a whole day addicted to modding So I started with pumps. It was necessary to complete the D5 pump ALPHACOOL together with Bitspower Top and mod kit. Perfect work on shiny afternoon.

Pumps are in a small package, which is exactly on them and nothing else. Bitspower packed top and kit into one big box with a label Special package - combo set.




All unpacked and ready for mounting





Before the assembly was needed but sleevecables from the pump. To make it look clean impression, so I sleeving cables to pumps inside





Make each pump took only a moment.





The box from the tank top is a beautiful image that makes everyone can handle this assembly





The pump is inserted into mod kit, and then this unit is screwed to the very top.





Complete longer functional pump ready for operation. And the base, which includes rubber anti-vibration pad.





Top offers 3 input and output threads 2, which is quite sufficient connectivity.











I have mounted pumps in the case. But unfortunately I do not have the strength to write another update todays and edit photos So just a small taste for next time

Damn, this does look very nice! I'm curious to se the big picture

UPDATE 11

As you probably noticed, so last week I have had no time to deliver the promised update abotu assembling of pumps But it is here, as well as photos of several new and very important things for the functioning of a computer


Pumps are ready in case!





That left only carefully think about where exactly is mounted, fortunately it was not rocket science





Then I traced the mounting holes on the paper and duct tape and drilled ..





Pumps in place, and with them the first fittings





There is already a little more fittings





I planned it that here will be rigid pipe, but when I did so a few days "watching" probably would be better to put the classic tubing there





Well, not completely better, but the smoothness appearance. At the bottom of the other tubes were problematic. And I do not want to mix so that the lower part will be classic tubing and the upper part of case will be acrylic pipes.





It is actually just the replacement of these two connections (four fittings).





I love the details on all products Bitspower





PSU from Coolermaster V1000, I think the perfect choice for this machine. I would like to thank the company Cooler Master, who believed in my projects already some years





PSU itself works very well, and his appearance is definitely worth mentioning.














An essential part of the resources are obviously cables.. Again, I would like to thank the Icelandic company http://www.IceModz.com for this beautiful, custom crafted, complete wiring for psu.




















Always I get an extra couple of things As various cables and led tapes in great quality. MORE SOON!!!

Oh boy, this is pure porn!

Quote:

Hehe thanks man!!

UPDATE 12

Today is the update massacre, in terms of the number of photos total 24 ..

I had moved to assemble components in case. The main panel where all the hardware will be installed again, as in the previous project, is removable. I can assembly HW and watercooling easier, and it's just an overall great

But first let's look at what I got for this project form ASUS Czech. I want to thank entire ASUS Czech team - not only for this support, but also for other things, projects and so on !! ASUS believes in me since the very beginning, and I really appreciate it



Motherboard Formula VII. P.S. On graphics cards from ASUS will look in next update

The main thing everyone notices is definitely a "shield" plates on both the front and rear.






Input and output connectivity boards, is more than sufficient. There is technology as IntelEthernet, LANguard, GameFirst III - which are perfect network technology for online gaming



Detail shield. Board also offers high-quality SupremeFX audio.



A total of four RAM slots for up to 3300+ MHz frequency (overclocking)



Without these buttons I cant imagine the board really useful things



SATA ports with speed 6Gb / s.



Tile is wearing an integrated VRM cooler. It is a copper block, so there is no corrosion problems or other problems.



Up to mount !!

The entire panel is composed of two parts, which probably does not have more to describe



And assembled together



Reservoirs in place. This is done so that it holds only on fittings (very tight). It took lot of measuring but now reservoirs are assembled without any screws, which to me looks much better



Fixation is using 90-degree fittings, couplings and bulkheads Bitspower.



Bottom mount exp.



Fittings on top.



As you can see, everything is perfectly precise and clean. Or not?



Motherboard in place, it begins to take shape. Finally!






The moment of truth, if everything is correct and the board, including its I/O panel sits right ...



I would say that totally fits exactly



Thus far it looks like.



Motherboard has also MPCIE COMBO III, which serves as a WiFi card, but here you can mount M.2 SSD.



Rear side. Here is the filling port for reservoir.



Total rear view.



How do you like it? I'll be glad for all the comments, criticisms, etc. MORE SOON!

It's an absolutely gorgeous board and I have to say, your mod is looking awesome so far!

UPDATE 13

Everything will be watercooled, so the RAM

The first step is to remove original HyperX heat sink.. Heat gun is best for this!




Naked HyperX Savage looks something like this








Then mounted Bitspower heatsink.. Also with new thermal pads





This new cooler is secured using two small screws and you're done





RAMs finished with new heatsinks








The panel looks great, but still missing something ..





..water block





The last few days I was thinking a lot about the entire loop. What and how. It was not easy, the loop must be simple and above all look good. After X a million options, I found a (hopefully) the best
This is just a small beginning





Even with this project, I follow that everything is all about detail and precision. More very soon !! Again, I will be glad for your comments, criticisms, etc.

UPDATE 14

On Friday was delivered the last component from the sponsors. A small, but very important!

Many thanks to Intel Czech for sending processor!



Arrived Core i7 4790K - that's the best thing you can put into the slot in 1150



My collection 4790Ks again slightly expanded



The processor includes a 4.0 GHz base frequency of 4.4GHz with TurboBoost. Of course overclocking is a great option due to unlocked multiplier.





Processor in place



A little paste directly mounted water block Bitspower ..



A long time I figured out how to do loop in this part. The priority is, of course, look



I think I had spent an hour or so. Mainly it had to correspond with the rest of the loop, because the block on the CPU has clearly given, which thread is the entrance and the which is exit. But in the end it worked out nicely and precisely



Thus far it looks like! Next time I promised graphics, cables, circuit etc etc By mid-September, it will hopefully be finished

Mmmmmhhhhhmmmmm, this is definitely looking nice! I always like builds with two reservoirs, symmetrically placed.