Hello everyone
- "Hello "
how's, Xray?
- "I resumed a normal pace "
same
- "I present next?"
I beg you
- "It's not much ...."
every detail matters
- "OK! thus, 2-3 cuts on the top of the frame with the transition to the rear of the power unit .... "




and two large round openings for both fans of the above I guess
- "Exact "




we will not let these two big openings thus...
- "You're right, we'll play jigsaw !"




- "An acrylic plate and start cutting what will be ...."
two large gears




- "We lightly sand "
bah! why you leave the sticker only on one of them ???
- "I don't know .... I like the colors ...




then
- "That's all for today "
it's short
- "But intense
ben! so! to the next ....
- "Ok "

Cuckoo
- "Cuckoo??"
yes it is to change the hello
- "Ok ..... but Cuckoo!"
it does not ....?
- "Bah ...."
I remain classic ....
- "I think so "
ok ... I do it again ....
- "Cuc one second "
:p hi to everyone
- "Cuckoo "
okay .... so! what do we do!
- "I feel my ..."
thou what ???
- "I hesitate to remove the label "




this is new? you know how we do with labels
- "I also wanted to change a bit "
yeah but not now ...
- "You're right I take this out !"




- "Of course we spotted the size of the block on the top of the frame "
for sure! but we have already cut the top the last time
- "I know but I like to take things back "




- "So this is where the power supply take place ..."
where?
- "here! you do not see ...."
yes ... I see but I do not see you
- "Eh !!!! how that you do not see me !!!!"
did you forget that a power supply can easily hide an Xray




- "And now you see me well !!!!"
ah! much better! Can be a little too




- "so! we passg on the front of the chassis "
and what have you prepared on it?
- "A plate "
thick plate !!! it's for?
- "To mark my landmarks "
therefore a priori I do not know more about this plate?
- "No "




ok! I know in more on why having disassemble the fan grille ...
- "Bah of course eyes:"
and then?
- "So I removed the fan grill "
I saw ....




- "Let me finish ops "
oops sorry!
- "So no need grid because the power supply, or at least the bottom going to face against the front of the chassis "
and that's why you took pins plate ....
- ".... Yes and no "





- "partially "
what to do then ....
- "partially to realize the location of cuts in the grid, while maintaining the position of the plate "
I still do not know its function ...
- "Not yet anyway "




- "And that's a thing done "
we advance a little more?
- "You want to know more about this plate "
yeah ...
- "May be we'll see next time "




- "Or maybe not "

- "See you soon "

Hello and good Sunday
- "Hello everyone "
So Xray! what's all this kit you have with you?
- "Oh not much :p some aluminum plates and acrylic that I got! "
and then ....
- "Told myself that I can do something with "
ok




ops ah yes !!! downright !!!
- "I needed some screws and brackets also profiles "




- "A small hole on the top tray "
I see! even if I wonder what it will be ....




- "Ben... actually is for decoration "
this stuff brass?
- "right! "




- "but also this leather cover "





it can hide the screws
- "Yes!"
and on the top, you put leather too?
- "No!"
What then ....
- "An aluminum plate "




- "I found that also for decoration "
cool




it's like the one that was placed in the back
- "Almost "
oh! but you added ....
- "Some gears and a small plate to not leave him alone "




- "We went to do some shopping ...."
bulbs?
- "Yes, but bulbs amp "





and there! at your feet !!!
- "This is making support for bulbs "




- "and placed on the aluminum plate "




no more than a lick of paint ....
- "Yes! that's why we're going to put aside to move to the acrylic plate"
one plate?
- "No, in fact there are two acrylic plate pasted "
and the behind ....
- "You have the eye , one in the back contains a large opening in the middle "
that is ....




- "To support an aluminum plate "
but the large opening ....
- "Ah! that you will know later "





I see you've bent the aluminum plate
- "nothing escapes you !!!"

- "it is for setting it up ... but before we will cut it "
the name of the mod!




- "a small transition to the a scroll saw "





- "the primer and the plate is positioned at the top of the front of the case "
the plate is held by two brass bolts "
- "Right!"




- "Not easy to prepare the front of the case ...."
we do not put the doors ....
- "No! lies the difficulty! had to play putty ...."
it seems imperfections remain !!!
- "this is what I am looking for ...."
they have to do something ....
- "you think... "




See you soon

continue the momentum of the news
- "the online video can not be long now .... "
just ... so we activate on our side eyes:
- "Ok! we saw the motherboard that was left hidden behind its cover ..."
now it is the turn of the graphics card




- "it is obvious that the original cooling system will be replaced ..."
by watercooling
- "exact, and therefore we are going ..... but what do I see ops "
what is this pellet ????
- "I read warranty void if removed ...."
definitely! they are found everywhere these labels




- "They disregard ...."
it is a question?
- "Well! no! you did well considering I had not put "?" "
go !!! then




Xray stop !!! I see where you come ...
- "how does ??? huh!"
yeah, yeah .... you'll still see your reflection on the GPU
- "but no I was just going to change the thermal paste "




- "I install the waterblock and I also want to paint the bracket "






- "side waterblock it's done "
you want to cover the other side?
- "Yeah "
ok
- "a small aluminum plate cut to size"
with a 90 ° bend on one edge




- "we cut an opening to let the input / output waterblock "




- "we make another more central to the plate "
why?
- "Because I wanted "
that's one reason that we can discuss ...
- " and I cover leather "




- "we manufacture a small grid which is painted copper "




- "4 brass bolts"
small gears
- "and it only remains to put in place on the graphics card"
how?
- 'By means of spacer screws and M3 "




A+

good evening
- "we put a lot of updates today "
you find ....
- "we're going back a bit on the set of the motherboard "
that were seen on the first post
- "it separates the case too"




- "the purpose of this plate is related to its thickness "
in the middle we have the acrylic plate
- "side motherboard, an aluminum plate is covering the acrylic sheet"
and we set up some holes in the acrylic plate ...
- "to include the power cables "




- "supply side, we realized that little aluminum plate "




with stand acrylic




- "To set up the connections to the power supply "




on backstage, we'll make some welds
- "the goal is to hide a maximum cable especially motherboard side "

- "so we have to play the welder because the wire will be welded to the back of the motherboard as the graphics card ...."
ops ops ops




we prepare the aluminum plate to be able to dress
- "once all the cuts made "




- "and we set up the aged leather "
with a strip of LEDs that will be under the motherboard.




and that other aluminum plate?
- "It's for the other side "
it has a weird shape!
- "this is on purpose "
I hope .....




- "in fact, it follows the cutting of leather skin "
ok! and the hole in which you find yourself ....
- "that's for later ... "




- "we add some gears "
thicker than the other
- "it varies a bit "




A bientôt

hello everyone
- "hello "
a small post on the watercooling ...
- "specifically on the tubing "
and we go on?
- "a tool that is well "
I guess this is the object that is at your feet ....




- "taking a step back, you will realize the size of the machine ..."
or size of Xray ....
- " "




- "a little learning bending with my plumber buddy "
and learn to cut straight sections




- "then we go to bending "
you put the tube in the tool
- "and you force like crazy "
you've got to bend your muscles, Xray!
- "look at the result instead of you laugh ...."




- "simple loop is simple! you hangers and you adjusted length for the establishment of the tube "
let's go easy on the cut , not too long and not too short especially ....
- "It's on the tube there needs to be spare "
and a good margin of time .....
- "It complicates things with a double loop "
there is already less obvious !!! not to bend ....
- "... but to respect the right length between both elbows "
because once it is bent ...
- "It is bent!"




we complicated a little more work ...
- "Go triple loop! "
we are pleased with the first portion This is not to miss on the second portion ....
- "Not to mention a visualization in space "




a picture of the fails?
- "bah! what you think !!! at the first time I realized my tubing "
ahem!
- "the family photo cheers !!!"




it's really nice but now they must be put in place
- "and there's not a lot of fun ...."
the pipes in the tips ... not obvious at first glance ....
- "especially when you have a limited place as under the cover of the radiator ..."
then comes the anxiety ....
- "white page "
no! Rather, the test leak..... paper towels everywhere and the pump is plugged ....
- "and it's nickel "
YES !!!!!