Since OCZ launched their latest Vertex 4 several weeks have passed. Meanwhile they've released new revision of their firmware. According to the manufacturer version 1.4 should be able to give a 20 percent improvement on sequential writes with a 256 Vertex 4. We're really curious if there really is such a significant improvement.
Specifications / Delivery
Model |
OCZ Vertex 4 512 Gigabyte |
OCZ Vertex 4 512 Gigabyte FW 1.4 |
OCZ Vertex 4 256 Gigabyte |
OCZ Vertex 4 256 Gigabyte FW 1.4 |
Capacity |
512 Gigabyte |
512 Gigabyte |
256 Gigabyte |
256 Gigabyte |
Memory |
Synchronous NAND
Flash |
Synchronous NAND
Flash |
Synchronous NAND
Flash |
Synchronous NAND
Flash |
Technology |
Intel 29 F32B08JCME3 |
Intel 29 F32B08JCME3 |
Intel 29 F16B08JCME3 |
Intel 29 F16B08JCME3 |
Throughput |
up to
535 MB/s reading, up to 475 MB/s writing
up to 85'000 IOPS
writing
up to 85'000 IOPS
reading |
up to
550 MB/s reading, up to 475 MB/s writing
up to 85'000 IOPS
writing
up to 95'000 IOPS
reading |
up to
535 MB/s reading, up to 380 MB/s writing
up to 85'000 IOPS
writing
up to 90'000 IOPS
reading |
up
to 550 MB/s reading, up to 465 MB/s writing
up to 85'000 IOPS
writing
up to 90'000 IOPS
reading |
Accesstime (read) |
< 0.1 ms |
< 0.1 ms |
< 0.1 ms |
< 0.1 ms |
Acoustics |
no noise |
no noise |
no noise |
no noise |
Warranty |
5 Years |
5 Years |
5 Years |
5 Years |
As you can see from the specs OCZ
has been able to improve performance of the smaller drive significantly. They
promise additional performance for the sequential reads and the sequential
writes. Especially the sequential writes profit from the firmware improvements.
According to the specs the drive becomes more than 20 percent faster. Concerning
sequential reads you get 15 Megabyte more throughput which results in an almost
three percent increase.
Discuss this article in the forum