CPU | Intel Socket 1155 Core i7, Core i5, Core i3 |
Chipset | Intel P67 |
Memory | Dual Channel DDR3, 4 x DIMM, Max. 32 GB DDR3, 2133(OC) / 2000 / 1866 / 1600 / 1333 / 1066 Non-ECC,Un-buffered |
Multi-GPU |
2-/3-way ATI CrossFireX 2-way NVIDIA SLI |
Slots | 3 x PCI-Express x16 (single @ x16,
dual @ x8, triple @ x8, x8, x4) 2 x PCI-Express x1 2 x PCI |
Sound | Realtek ALC892, 7.1-Channel HD Audio Codec, S/PDIF Out |
Storage | 2 x SATA 6.0 Gb/s (RAID 0, 1, 5, 10) 4 x SATA 6.0 Gb/s (Marvell SE9120) 4 x SATA 3.0 Gb/s (RAID 0, 1, 5, 10, JBOD) 1 x eSATA 6.0 Gb/s |
I/O internal / Connectors | 4 x SATA2 3.0 Gb/s connectors, support RAID (RAID 0, RAID 1, RAID 10, RAID 5 and Intel® Rapid Storage), NCQ, AHCI and Hot Plug functions 6 x SATA3 6.0 Gb/s connectors 1 x ATA133 IDE connector (supports 2 x IDE devices) 1 x Floppy connector 1 x IR header 1 x COM port header 1 x HDMI_SPDIF header 1 x IEEE 1394 header 1 x Power LED header 1 x Power Button 1 x Reset Button 1 x CLR CMOS Button CPU/Chassis/Power FAN connector 24 pin ATX power connector 8 pin 12V power connector CD in header Front panel audio connector 4 x USB 2.0 headers (support 8 USB 2.0 ports) 1 x USB 3.0 header (supports 2 USB 3.0 ports) 1 x Debug with LED |
I/O external | 1 x PS/2 Mouse Port 1 x PS/2 Keyboard Port 1 x Coaxial SPDIF Out Port 1 x Optical SPDIF Out Port 3 x Ready-to-Use USB 2.0 Ports 1 x Fatal1ty Mouse Port (USB 2.0) 1 x eSATA3 Connector 4 x Ready-to-Use USB 3.0 Ports 2 x RJ-45 LAN Ports with LED 1 x IEEE 1394 Port 1 x Clear CMOS Switch with LED HD Audio Jack: Side Speaker / Rear Speaker / Center / Bass / Line in / Front Speaker / Microphone |
Forfactor | ATX (30.5cm x 24.4cm) |
BIOS | 32 Mb Flash ROM , EFI AMI BIOS |
Regarding the delivery you'll find everything you need. Unfortunately you'll only find a SLI Bridge but no CrossFire bridge.
Fatal1ty Mouse Port | The Fatal1ty Mouse Port allows gamer to set the polling rate directly at the USB port. Therefore it is possible to choose a polling rate which is between 125 to 1'000 Hz. |
Fatal1ty F-Stream | Using this software one can monitor and overclock its new system. It is possible to check voltages and fan speeds. The fan speeds can also be manipulated as well as the voltages. Also the CPU frequency can be change by adjusting the multiplyer and base clock. |
Dual LAN Teaming | Using this feature allows you to bundle the two built in LAN interfaces which results in higher network bandwidth. |
Page 1 - Introduction | Page 4 - Connectors and I/O |
Page 2 - Specifications / Delivery | Page 5 - Conclusion |
Page 3 - Layout |
Navigate through the articles | |
MSI Big Bang Marshal P67 | MSI P67A-GD65 Review |
|