Review: OCZ Silencer MK III 1200 Watt Platinum

Published by Marc Büchel on 22.08.12
Page:
« 1 2 (3) 4 5 6 ... 10 »

Delivery and Specifications

Delivery

Cable Length
1 x ATX 24 pin 62.5 cm
2 x EPS/ATX 12V 4+4 pin 64 cm
6 x PCI-E 6+2 pin 58 cm
3 x 4 SATA 85 cm
1 x 4 pin Molex 85 cm
1 x Floppy 10 cm

The delivery found with the OCZ Silencer MK III 1200 Watt is very good. Even a high-end gaming system or an overclocking setup can be wired seamlessly. It's possible to NVIDIA SLI or AMD CrossFire setup with this PSU and up to twelve SATA devices can be connected to this unit. There is also the possibility to connect two EPS plugs to motherboards, which offer this feature. Another very special feature is the silent mode. Once you flip the switch above the main power connector it is activated. Now the 140 millimeter fan will remaind dead silent up to a load of 50 percent or in other words 600 Watts.


 


Specifications

Voltage Current Power
+ 3.3 V 20 A 100 Watt 1200 Watt (Total)
+ 5.0 V 20 A
+ 12 V1 99.5 A 1194 Watt
- 12 V 0.5 A 6 Watt
+ 5 Vsb 2.5 A 12.5 Watt


The Mk III 1200 Watt has been 80Plus Platinum certified, which means that this PSU is able to reach a maximum efficiency above 92 percent. Furthermore this PSU complies with ErP guidelines (Energy Rated Product) and therefore it consumes less than 1 Watt when an attached system is powered off or in standby. Following we show you the feature list, which is quite long with this product.
  • 1200W Power Output with Single Strong 12V Rail
  • The PC Power and Cooling PPCMK3S1200 power supply delivers continuous 1200W @ 50°C of safe, reliable output for your computer systems. One single strong +12V rail with 2 x 4+4-pin CPU power connectors and 6x 6+2-Pin PCIe connectors can juice up your high-end CPU and even multiple graphics cards.
  • 80 PLUS Platinum Certified
  • The 80 PLUS Platinum certified power supply provides ultra-high power efficiency of at least 89% (up to 92% under real world operating environments for this model) at any load between 20% and 100%, saving your money on your electrical bill, reducing heat in your computer's system and prolonging its life.
  • The modular cable design allows use of only the cables you need for reduced system clutter and improved air flow.
  • Comprehensive Protection
  • Industrial grade protection circuitry (over-voltage, over-power, and short circuit) provides maximum safety to your critical system components.
  • The PC Power and Cooling PPCMK3S1200 is AMD CrossFireX and NVIDIA SLI Ready and comes with 6x 6+2 Pin PCI-E connectors enabling you to build a high performance multi-GPU gaming system.

  • Dual Thermal Control System: Normal Mode and Silent Mode operation
  • Built with 100% Japanese low ESR 105°C capacitors for high reliability
  • Compliant with the latest ATX12V v2.31 and SSI PSDG standard for worry-free compatibility
  • 140mm double ball-bearing fan varies RPM by load and temperature for whisper quiet operation
  • Active Power Factor Correction (PFC) to effectively regulate input voltage
  • Unboxed Product Weight 2.88kg; 6.34lbs




  • Page 1 - Introduction Page 6 - Performance 50 % load
    Page 2 - Preview Page 7 - Performance 100 % load
    Page 3 - Delivery/Specs Page 8 - Average Values
    Page 4 - Test setup Page 9 - Input/Output Power and Efficiency
    Page 5 - Performance 20 % load Page 10 - Conclusion



    Discuss this article in our forums.




    Navigate through the articles
    Previous article Review: Corsair AX1200i 1200 Watt Review: Corsair CX430 Next article
    comments powered by Disqus

    Review: OCZ Silencer MK III 1200 Watt Platinum - PSUs - Reviews - ocaholic