Sort by:
Title (
)
Date (
)
Rating (
)
Popularity (
)
Sites currently sorted by: Popularity (Least to Most Hits)
)
Date (
)
Rating (
)
Popularity (
) Sites currently sorted by: Popularity (Least to Most Hits)
Zalman's CNPS10X Extreme fulfills both roles pretty well care of a cleverly integrated PWM fan speed controller in the top part of the fan shroud. Do nothing and the CNPS10X Extreme's 120mm fan will fall under BIOS control, automatically scaling fan speed from 1000RPM to 2150RPM as needed. Set the fan speed controller and the heatsink operates in one of three fan-duty modes, or responds to the turn of a dial to the exact fan velocity you want.
Continuing on from the Noctua NH-C14S review, we have another revision of another Noctua cooler. This time the flagship NH-D15 gets the treatment in the form of the NH-D15S. The Noctua NH-C14S is a really impressive cooler and a typical Noctua design, unusual but sublime in its execution.
Deepcool’s original Assassin CPU cooler came out in 2013 and one one of the largest and best performing coolers available. 2014 brought in the Lucifer, which we tested and it proved to be one of the best coolers available at the time. It is now 2015 and Deepcool has released the successor to the original Assassin, the Assassin II. This massive air cooler features a dual tower design, two cooling fans (140mm and 120mm), 8 nickel-plated copper heatpipes and its own 4-port fan hub. Can this cooler reign supreme like Deepcool’s previous two coolers? Read on as we find out…
Anyone who has gone looking for a CPU cooler knows there are a ton of choices on the market. In most instances, you the buyer, have some prerequisites to the purchase of any cooler. Things like noise level, appearance, and fit are top of the list in most instances. On the flip side of things, there are a bunch of guys who don't really care what it looks like, or if it will fit in a case, as likely they are using some sort of test bench. What matters most to these users is performance and if they can set new records with the use of a newly released air cooler.
On the cooling test bench today we have something pretty special, the NoFan CR-80EH. The latest cooler from NoFan, a completely passive CPU cooler that obviously promises silent performance for your computer, but it’s also the newer, more budget friendly model of their previous fan-less CPU cooler, the CR-95C which we reviewed two years ago. We were really impressed by the performance of the previous model, it kept our CPU well within the safe zone for your average user and of course it didn’t without making so much as a whisper of noise.
DeepCool's IceBlade Pro heatsink is Xigmatek-esq looking exposed heatpipe base CPU cooler with a dark nickel plating over every inch. The IceBlade Pro is built around four 8mm diameter copper heatpipes which conduct heat to the aluminum cooling fins above. Exposed heatpipe heatsinks are good with CPUs that have large integrated heat spreaders and large silicon die's below (to spread the heat around). One or two 120mm fans can be mounted to either side of the cooler, and rubber vibration absorbing posts are supplied along with extra fan clips. A single 120mm PWM fan that operates at 900-1500RPM is supplied.
Zalman's CNPS9900 Max is built with better heat conducting 'composite heatpipes,' a more robust mounting system, a larger copper base plate that is machined flat and a 130mm diameter fan. The face lift and design revisions aren't cosmetic, the CNPS9900 Max heatsink performs much better than its forerunner and offers very good low noise cooling too. Like most Zalman heatsinks, the CNPS9900 Max is based off entirely original design concepts; two radial fin arrays surrounding an inset 130mm PWM fan that draws air past one set of cooling fins before exhausting it through the second.
This time we tested the Rosewill RCX-ZAIO-92 CPU cooler, which has a tower heatsink with three heatpipes and a 92 mm fan.
The Gelid Tranquillo heatsink stands 153mm tall and ships with a single 120mm PWM fan mounted. The tower-style heatsink weighs 645 grams and is compatible with Intel socket 775/1156/1366 and AMD socket 754/939/940/AM2+/AM3 processors. While you might expect the Tranquillo to be an exposed base heatpipe heatsink, it is not. Instead the four copper heatpipes are grouped closely at the base on a small copper heatspreader, and also grouped relatively closely to one another where they pass through raw aluminum cooling fins.
Technic3D hat den Phanteks PH-TC14PE CPU-Kühler im Test. Der neue CPU-Kühler bietet eine umfangreiche Ausstattung und verschiedene Farbvarianten. Weiterhin stehen dem Kühlgiganten zwei 140mm und fünf 8mm Heatpipes zur Verfügung, So gerüstet möchte Phanteks in der oberen Liga der hiesigen Kühlergemeinschaft ein Wörtchen mitreden. Ob der Einstieg gelungen ist, steht im nachfolgenden Artikel.
execution time : 0.089 sec